Diamond Depth and Table Percentage: What the Numbers Mean

Two percentages on every grading report tend to confuse buyers more than any others. Diamond depth and table percentages describe the shape of a diamond’s profile, and together they hint at how well the stone handles light. They are worth understanding, but they are also easy to overvalue. Here is what the numbers mean, how they are calculated, and how to use them sensibly.

Quick answer: Table percentage is the width of the top facet divided by the diamond’s diameter, and depth percentage is its height divided by that same diameter. Stones that are far too deep or too shallow leak light, but there is no single perfect number, so use these figures to screen out outliers and rely on cut grade and appearance to decide.

What table percentage means

The table is the large, flat facet on top of the diamond, the one you look straight into. Table percentage expresses the width of that facet as a percentage of the diamond’s average diameter (for a round) or its width (for most fancy shapes).

How it is calculated: table width ÷ average diameter × 100. If a round diamond is 6.50 mm across and its table measures 3.70 mm, the table percentage is about 57%.

On a report, the table percentage appears in the proportions section, often next to a side-view diagram. It is rounded to the nearest whole number on many reports, so two stones listed at 57% may differ slightly in reality.

A larger table gives a wide, open window into the stone and can contribute to brightness. A smaller table leaves more room for the angled crown facets, which help create fire, the flashes of color you see when a diamond moves. Neither is automatically better; it is a balance.

What depth percentage means

Total depth percentage measures how tall the diamond is, from the table to the culet at the bottom, relative to its diameter or width.

How it is calculated: total depth ÷ average diameter × 100. A round that is 6.50 mm wide and 3.98 mm deep has a depth percentage of about 61.2%.

You can check this yourself using the measurements printed on the report, for example “6.48 – 6.52 × 3.98 mm.” Average the two diameters, then divide the depth by that figure. The report already lists depth percentage, but doing the math once helps the number make sense.

Total depth is made of three parts stacked on top of each other: the crown above the girdle, the girdle itself, and the pavilion below. A stone with a thick girdle can show a higher depth percentage even when its crown and pavilion angles are excellent, which is why the girdle description on the report is worth reading alongside the percentage.

Want to see your ring before you decide? Book a Virtual Appointment

Why too deep or too shallow leaks light

A diamond’s sparkle comes from light entering the top, bouncing off the angled facets of the pavilion (the lower half), and returning back up to your eye. The angles have to be right for that to happen efficiently.

  • Too deep: the pavilion is steep, so light can strike the facets at angles that let it escape out the sides, and the center may look darker. A deep stone also carries more weight underneath, so it faces up smaller than its carat weight suggests.
  • Too shallow: the pavilion is flat, so light can pass straight out the bottom. Very shallow stones can show a washed-out ring or a glassy, see-through look in the center, sometimes called a “fish-eye” effect.

Depth percentage is a total number, though. It combines crown height, girdle thickness and pavilion depth. Two stones with identical depth percentages can be built quite differently, which is one reason the number alone cannot predict beauty.

Worked example: comparing two diamonds

Imagine two round diamonds, both 1.00 carat and both graded G VS2. Diamond A measures 6.45 – 6.48 × 3.97 mm. Diamond B measures 6.20 – 6.24 × 4.05 mm.

  1. Average the diameters. A is about 6.47 mm across; B is about 6.22 mm.
  2. Divide depth by diameter. A works out to about 61.4% depth; B to about 65.1%.
  3. Interpret. B is noticeably deeper. It carries more of its weight below the girdle, so it faces up about a quarter of a millimeter smaller than A, and its steeper pavilion may leak more light at the edges.
  4. Check the rest. Look at both cut grades, the girdle descriptions and video. If B has a very thick girdle, that explains part of its depth.

On paper the two stones share weight, color and clarity. The depth and table numbers are what tell you they will look different on the hand, and that is exactly how these percentages earn their place.

Why there is no single magic number

You will see many “ideal” ranges quoted online. For round brilliants, commonly cited guidance puts tables somewhere in the mid-50s percent and total depth in roughly the low 60s, but different sources draw the lines differently, and plenty of beautiful diamonds fall slightly outside any given chart.

The reason is that light performance depends on how the parts work together, especially the crown and pavilion angles. A slightly larger table can be balanced by a particular crown angle; a slightly higher depth may be fine if it comes from a thicker girdle rather than a steep pavilion. GIA’s overall cut grade for round brilliants is designed to account for these interactions, along with polish and symmetry. The AGS grading system likewise evaluates cut through light performance rather than a couple of percentages.

In short, use depth and table to spot outliers, then rely on the cut grade and on how the diamond actually looks. Our guide to diamond cut grades covers that next step.

How fancy shapes differ

Fancy shapes do not follow round-brilliant rules. Their typical proportions vary widely by shape and by cutting style, and most do not receive an overall cut grade on GIA reports.

Shape How depth and table behave What to check alongside
Round brilliant Most standardized; percentages are a useful screen Cut grade, crown and pavilion angles
Oval, pear, marquise Wider acceptable range; deep stones look smaller face up Length-to-width ratio, bow-tie effect
Cushion Often deeper by design; varies a lot between cutting styles Outline, faceting style, video
Emerald, Asscher Step cuts with large tables; proportions affect the “hall of mirrors” look Clarity, symmetry, corner cuts

For shape-specific advice, see our cushion cut diamond guide and emerald cut diamond guide.

Elongated shapes add one more variable: the bow-tie, a dark band across the center that appears when light leaks in that area. Depth and table hint at it, but only photos or video show how strong it is. A modest bow-tie is normal in ovals, pears and marquises; a heavy one makes the stone look as if it has a shadow across its middle.

Common mistakes with depth and table

  • Rejecting a stone over a fraction of a percent. A diamond that sits slightly outside a chart you found online may still be beautiful. Look before you rule it out.
  • Comparing fancy shapes with round charts. A cushion or oval judged by round-brilliant numbers will often look wrong on paper and right in person.
  • Ignoring the girdle. A thick girdle raises depth and hides weight without improving looks; an extremely thin girdle is more prone to chipping.
  • Forgetting the setting. A very deep stone sits higher and needs a taller setting, which can change how the ring wears day to day.
  • Treating the numbers as the whole story. Angles, symmetry and polish all shape sparkle. Percentages are a screen, not a verdict.

How to use diamond depth and table when shopping

Think of diamond depth and table numbers as a screening tool:

  1. Start with the cut grade for rounds. Excellent or Very Good is a sensible baseline.
  2. Glance at depth and table. If either is far outside the usual range for that shape, look more carefully.
  3. Compare diameter to carat. A stone that measures small for its weight is often deep.
  4. Look at the diamond. Video and photos tell you whether it is bright, lively and evenly lit, which is what you will actually enjoy.
  5. Ask a jeweler. Someone who has handled the stone can tell you more than any percentage.

When you are ready, you can review a shortlist with a jeweler during a virtual appointment. If you are new to grading in general, our guide to the 4 Cs of diamonds puts depth and table in context with carat, color and clarity.

Frequently asked questions

What is a good depth percentage for a round diamond?

Commonly cited guidance for round brilliants falls roughly in the low 60s percent, but there is no single correct number. Use the cut grade and the stone’s appearance to make the final call.

Is a bigger table better?

Not necessarily. A larger table can add brightness, while a smaller one leaves more room for crown facets that create fire. Balance with the other angles matters more than the table alone.

Why does my diamond look small for its carat weight?

It may be cut deep, carrying weight in the pavilion or a thick girdle. Compare its millimeter diameter with typical sizes for that weight.

Do lab-grown diamonds have different ideal proportions?

No. Light behaves the same way in lab-grown and natural diamonds, so the same proportion principles apply to both.

Where do I find depth and table on a report?

Most full reports list both in the grading results or the proportions diagram, along with crown and pavilion angles, girdle thickness and culet size.

Does a deep diamond look smaller?

Usually, yes. A deeper stone keeps more weight below the girdle, so its face-up diameter is smaller than a well-proportioned stone of the same carat weight.